Wato Pump - Waterproof Auto Pump

Wato Pump

The Water Smart Pump upgrades your pumping setup with automated pressure control, built-in pulsation modes, and water-resistant operation for a smoother, more controlled session.

Rated IPX8 for water resistance, the pump is built for wet environments and works with both air and water pumping setups. Use it connected directly to your cylinder or attach it with a standard hose, depending on your preferred configuration.

With a 0–45 kPa pressure range, the Water Smart Pump gives you broad control from light conditioning to stronger vacuum sessions. The auto-hold pressure function helps maintain your selected pressure without constant manual adjustment, while the built-in session timer tracks your time automatically.

Nine pre-loaded pulsation modes let you cycle pressure patterns without needing to manually pulse or reset the pump. USB-C charging keeps the unit simple and modern, with approximately 2 hours of charge time providing up to 2 hours of use.

Key Features

• IPX8 water resistance rating
• 9 pre-loaded pulsation modes
• Auto-hold pressure control
• 0–45 kPa pressure range
• Built-in session timer
• USB-C charging
• Approximately 2-hour charge time
• Up to 2 hours of use per charge
• Works directly connected to the cylinder
• Compatible with standard hose setups
• Water and air pumping compatible

Recommended Use

Start conservatively and use controlled pressure. Proper fit, steady pressure, and consistency matter more than excessive vacuum. Beginners should start with lower pressure and shorter sessions before increasing time or intensity.
Ways to Pump  

Power Button

• Hold for 3 seconds to turn on.
• Hold for 3 seconds to turn off.
• In Manual Mode: press once to start pumping.
• Press again to stop pumping when the desired pressure is reached.
• In Smart Mode: press anytime to return to Manual Mode.

Air Release Button

• Press once to release part of the pressure.
• Press and hold to release all pressure.
• In Smart Mode: press anytime to return to Manual Mode.

Smart Button

• Press once to enter Smart Mode.
• In Smart Mode: press to switch between 9 smart modes.

9 Smart Modes

1. Mode 1: Pump to -20 kPa, release to 0, cycle for 20 minutes.
2. Mode 2: Pump to -20 kPa, hold for 1 minute, release to 0, cycle for 20 minutes.
3. Mode 3: Pump to -20 kPa, variable-frequency pumping/releasing cycle, automatically cycle for 20 minutes.
4. Mode 4: Pump to -30 kPa, release to 0, cycle for 20 minutes.
5. Mode 5: Pump to -30 kPa, hold for 1 minute, release to 0, cycle for 20 minutes.
6. Mode 6: Pump to -30 kPa, variable-frequency pumping/releasing cycle, automatically cycle for 20 minutes.
7. Mode 7: Pump to -40 kPa, release to 0, cycle for 20 minutes.
8. Mode 8: Pump to -40 kPa, hold for 1 minute, release to 0, cycle for 20 minutes.
9. Mode 9: Pump to -40 kPa, variable-frequency pumping/releasing cycle, automatically cycle for 20 minutes.